Wireless Wheel Controls - 8 Channel CAN

8-channel system with Easyfit Transmitter which bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels. 

Kit Includes:

• Easyfit Transmitter assembled to button plate with 8 soldered pushbuttons and covers
• Battery
• Decal sheet
• Receiver with AMPSEAL connector
• Wiring Harness
• USB cable
• Installation instructions
• Optional 120 Ohm CAN Termination Resistor included.

Wireless Module Types

CAN:

• Full low-side switching of up to eight, 600mA loads all via CAN with endless re-configuration possibilities, using the included free programming software.
  
• Two analogue channels for wireless potentiometer control such as Launch, Traction, Boost Control and many more
• Seamless PDM/ECU or Dash Display integration. We can supply the kit with many different CAN Presets to suit Ecumaster, Link ECU, MaxxECU, Haltech and more. 
  
• Includes a rainlight function, perfect for racing with dual solid light and 4Hz flashing hazard modes, and Flash-to-Pass to give a 2-second 4Hz headlight flash.
  
• Choose any combination of smart headlight, smart indicator, IVA fog light and rainlight modes or momentary and latching behaviour for each solid state channel.
• The Receiver measures 86 x 55 x 35mm and weighs 112g.
• At just 176 x 154 x 19-29mm, the fully assembled transmitter and button plate weigh just 220g including the battery!
  

Hardware Features

• CAN output from 6 or 8 pushbuttons to your CANbus
• CAN signalling of 0 or 2 variable outputs (0-11 CAN) for wireless rotary control such as multimap boost switching and traction slip control
• Compatible with all major CAN systems
• Ultimate performance from a 10ms / 100Hz broadcast rate
• Ultimate compatibility from 7 simultaneous CAN message formats (LSB, MSB and bitmasking) with free selection of base address, bus speed and identifier length
• Use as momentary switches with logic handled by your PDM, or use our intuitive configuration tool to quickly convert to latching or one of our range of driving and racing output channel modes
• Re-configurable using the included FREEWheel USB programming software
• AMPSEAL connector(s)
• IP67-rated USB port with rubber cap
• Flame-retardant ABS plastic
• Fully conformal coated for environmental protection
• Battery life over 5 years
• Unique Transmitter ID prevents cross-talk and interference
• Wiring loom 20AWG
• Option to upgrade to carbon fibre button plate

Driving Features

• Momentary
• Latching
• BlinkSTOP indicator cancelling
• BeamSTOP main beam toggle & flash
• Flash-to-Pass
• IVA fog light behaviour
• Hazards
• Wiper Latch & Intermittent
• Flash
• Rainlight behaviour

Size & Weight

• Easyfit Transmitter: bolts straight onto your steering wheel hub and fits all standard bolt patterns on 6 x 70mm, 6 x 74mm and 3 x 50.8mm PCD steering wheels
• Easyfit Transmitter: 176 x 154 x 19-29mm, 220g including battery
• CAN Receiver: 86 x 55 x 35mm, 112g including loom