The vehicle-specific CANchecked MFD28 Gen2 for your Audi 80 B4 - perfectly integrated and all data always in view

The vehicle-specific MFD28 Gen2 transforms your speedometer unit into an intelligent display with features you won't want to be without. Our displays are designed to be installed by anyone. Illustrated installation instructions are available for most models, allowing you to install your display without having to visit a workshop.

Key Features

Perfect integration: The vehicle-specific design allows all previous uses
Can Bus: Reading out in-depth vehicle data such as manufacturer diagnostic tools
Gear display: Directly via Can Bus or calculated from speed and rpm
Touchscreen: Navigate through the pages using intuitive swipe gestures
Customization: Design your own pages, add your own images or your own start animation
Additional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display
Can Switching: Use your display as a keypad and send your own Can messages to the bus
Customizable Alarms: Individual alerts can be easily configured and activated. For example, receive a large warning message when the exhaust temperature exceeds 900 degrees Celsius.
Logging: Log and save your data for later analysis on the internal SD card
Performance Meter: Measure your 0-100, 100-200 and 0-200 times with the integrated Performance Meter without any additional hardware
DTC*: Read and clear errors from engine control unit, transmission, ABS and all-wheel drive
Dimming*: Your display dims automatically along with the instrument panel

Different views

Configure your own page or choose from various pre-designed views:

The display is delivered with predefined sample pages
Creating your own pages is possible and desired
Up to ten pages possible
20 different widget types (e.g. sensor value, analog pointer, YT diagram, rpm bar, round display, vertical/horizontal bar)
Widgets are scalable and can be positioned using drag and drop
Widget colors fully adjustable
Up to 64 widgets per page

Display Setup Software - DSS

With the CANchecked DSS, you can completely customize your display to your needs. The integrated log viewer lets you download and view log files. A CAN logger is also integrated. The centerpiece is the integrated TRI editor, which allows you to customize the sensors (whether CAN bus or internal): Assign min/max values for warnings and change the names of your sensors.

Supported values

Many customers always ask: Which values can I query from my control unit? The answer: ALL

We've reverse-engineered the data for most engines and can offer in-depth information. In addition to CAN bus data retrieval (UDS, TP2, and manufacturer-specific protocols) (ISO 9141), our display supports data retrieval (ISO 9141).

By default, your display comes with pre-built TRI/TRX files. These files define all the sensors that will be queried. These vary from motor to motor. Here's an excerpt of what's possible:

Temperatures:

Exhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG temperature

Pressures:

Boost pressure, ambient pressure, fuel pressure pre-feed pump, rail pressure actual/target

Lambda/mixture:

Lambda value, injection time, short-term lambda adjustment, long-term lambda adjustment

Miscellaneous:

Engine speed, air mass, vehicle speed, throttle angle, ignition angle total, ignition angle retardation per cylinder, N75 activation in %, terminal 30 voltage, torque, gear, diesel-specific values

If any values are missing, we can add them later.

Scope of delivery

Every delivery includes:

MFD28 Gen2 data display integrated in the ventilation insert for Inside OEM Dash vehicles
Connector A (8-way Molex)
Connector B (10-way Molex)
Pre-assembled connection cables in various colors (length: 20 cm, intended use: power supply, CAN bus, analog inputs, 5V, sensor ground)
Pins for crimping yourself
Two 1K resistors (as pull-up for connecting external NTC sensors)
Quickstart Guide
USB data cable
SD card (pre-installed in the display)
SD card adapter
Display film (to prevent reflections)

Connection and expansion

Any sensor can be connected via the four analog inputs – we support both linear 0-5V and NTC sensors.
Our proprietary CANchecked sensors are stored in the TRI/TRX files by default and simply need to be connected:

AIN1: Temperature sensor (NTC01)
AIN2: Converter for exhaust gas temperature probe type K (TCC01)
AIN3: Pressure sensor 0-10 bar (FLP01)
AIN4: Boost pressure sensor 0-5.5 bar absolute (BST01)

You can use our pre-assembled AIN wiring harness for the connection.

In addition to the analog sensors, you can also connect our external shift light with 8 LEDs. This can flash in different colors, and the rev limits and colors can be configured directly on the display.

Connect the ethanol sensor directly to the display. You need a pull-up resistor (10K) between 5V and the signal. You can then view and log the ethanol content and temperature directly on the display.

Advanced features

You can use the math channels to calculate sensors with each other. User tables allow you to generate additional sensors using 2D or 3D maps.

* not available for all protocols