MXG 1.3 Strada Light 7" Dash Display - Race Icons

Compact Dash Display

The MXG Strada with race icons is one of the most widely used dash displays on tracks around the world. The Strada ‘Light’ version has been created as a more accessible product for people who will use fewer analogue inputs and just need a CAN connection for their ECU.

Why Choose the MXG 1.3 Strada Light Display

Whilst being very similar to the MXG Strada, the MXG Strada Light gives 4 fully configurable analogue inputs (max of 500Hz each) instead of the 8 that are found on the standard MXG Strada (max of 1,000Hz each). It also doesn’t have a digital output or an RPM connection, which is found within the standard MXG Strada.

Choose either the OBDII or K-Line CAN, depending on whether you want to connect to the vehicle's ECU or OBDII port or directly to the ECU through the CAN channel.

Easy Connection

Connecting the MXG 1.3 Strada Light dash to your ECU is simple. You can sample and display dozens of channels straight from the vehicle's ECU. This is usually the quickest and easiest setup, needing only 2 wire connections to the ECU instead of multiple connections to analogue sensors.

The sampled data depends on the actual ECU, but will typically include RPM, throttle position (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear and lambda value (air/fuel ratio). The list of available ECU drivers is over 1,000 and is constantly being updated and upgraded.

With the CAN output, you can send messages directly to an existing CAN network to improve the range of vehicle control possibilities. Two analogue camera inputs are also available to switch your display into a mirror camera, through a push button command or event management. The camera is sold separately.

Display with Race Icons

The MXG 1.3 Strada Light has a 7" high contrast TFT colour display. The visual quality is optimised by the ambient light sensor, which keeps the backlight at the best brightness levels. Race icons allow you to apply conditions to the LED icons.

Pre-Configured Pages

The MXG 1.3 Strada Light shows the RPM scale and all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can customise pages to suit your requirements, including up to four additional fields, and you can define what data is shown with the end of scale and measure units.

Flexible Shift Light & Alarms

The 10 multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold on analogue or digital inputs, ECU values, expansion values, math channels or optional GPS option. You can choose the conditions and colours, select a solid arm or a flashing one and the flashing frequency. You can also configure an accompanying text message and set the alarm priorities.

Technical

Ambient Light Sensor: Yes
Alarm LEDs: 8 configurable RGB LEDs
Shift Lights: 10 integrated, freely configurable RGB LEDs
Alarm Display Icons: Yes, freely configurable
CAN Connections: 3
ECU Connections: CAN or K-Line
ECU Compatibility: +1,000 industry-leading ECUs
External Modules: GPS Module, ACC3, LCU1S, SmartyCam 3 Series
Analogue Inputs: 4 fully configurable, max 500Hz each
EXT Video Inputs: 1 PAL-NTSC
Second CAN: Yes
Body: Anodised aluminium
Push Buttons: Metallic
Connectors: 1 AMP connector & 1 binder connector
Power Consumption: 400mA

Display

Display: 7" TFT
Resolution: 800 x 480 pixels
Contrast: 1,000:1
Brightness: 700cd/m² - 1,100 Lumen

Size & Weight

Dimensions: 237.1 x 127.6 x 26.0mm
Weight: 850g

Waterproof

IP65

Downloads