{"product_id":"mxp-1-3-6-tft-car-dash-display-logger","title":"MXP 1.3 6\" Dash Display Logger","description":"\u003ch3\u003eAdvanced Motorsport Dash Logger\u003c\/h3\u003e\n\u003cp\u003eThe MXP car dash display logger has a 6\" TFT digital display, which has been designed to acquire and display data coming from the ECU. It is an ideal choice for racers who want valuable data at their fingertips but might be limited by space in the cockpit.\u003c\/p\u003e\n\u003cp\u003eNote: The MXP Strada option is also available with road icons to suit a variety of vehicle applications.\u003c\/p\u003e\n\u003ch3\u003eEasy Connection\u003c\/h3\u003e\n\u003cp\u003eConnecting the MXP 1.3 dash to your car's ECU is simple. You can sample dozens of channels straight from the ECU. This is usually the quickest and easiest setup, needing only a cable connection to the ECU instead of multiple connections and analogue sensors.\u003c\/p\u003e\n\u003cp\u003eThe sampled data will depend on your actual ECU, but typically includes RPM, engine load, throttle position (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear and lambda value (air\/fuel ratio). The list of available ECU drivers is constantly updated and upgraded, and includes over 1,000 different ECUs.\u003c\/p\u003e\n\u003ch3\u003eTwo Digital Outputs\u003c\/h3\u003e\n\u003cp\u003eThe MXP car dash display logger features two digital outputs. Each of them can give an output of 1 amp at 12 volts. They can be configured to be turned on\/off depending on the value of the analogue or digital inputs. They permit automatic running of external systems such as switching on\/off additional lights, activating\/deactivating a cooling fan or circulation pumps when a certain event happens.\u003c\/p\u003e\n\u003cp\u003eWith the CAN output, you can also send messages directly to an existing CAN network to improve the range of vehicle control possibilities.\u003c\/p\u003e\n\u003ch3\u003eConfigurable Display\u003c\/h3\u003e\n\u003cp\u003eWith a high contrast 6\" TFT display, which is fully configurable, you can create and customise pages\/displays to suit your requirements. Swapping pages can be managed by pushing one or two push buttons. An ambient light sensor adjusts the backlight for optimal brightness, ensuring clear visibility in all lighting conditions.\u003c\/p\u003e\n\u003cp\u003eTwo analogue camera inputs are available to switch your display into a mirror camera, through a push button command or event management. The camera is sold separately.\u003c\/p\u003e\n\u003ch3\u003eFlexible Alarms\u003c\/h3\u003e\n\u003cp\u003eThe MXP car dash display logger has 6 configurable RGB LEDs. You can choose the conditions and colours. Select a solid alarm or flashing one, and the flashing frequency. You can choose to have an accompanying text message and set the alarm priorities.\u003c\/p\u003e\n\u003cp\u003eWith integrated shift lights, you can choose from a host of advanced multi-coloured RGB shift light patterns that can be customised to suit your requirements, and for each unique gear when required.\u003c\/p\u003e\n\u003ch3\u003eGPS Options\u003c\/h3\u003e\n\u003cp\u003eThe included GPS09 module connected via CAN to the MXP dash logger makes lap time calculations and track position analysis easy. With 4,000+ worldwide tracks already stored with the start and finish line coordinates, you will have no problem when you're on the track.\u003c\/p\u003e\n\u003cp\u003eAs soon as the MXP is turned on, the GPS module will locate its position, identify track line coordinates and start immediately sampling lap and split time. If the track is not in the database, you can easily add the start\/finish line coordinates to the MXP using our Race Studio 3 software.\u003c\/p\u003e\n\u003cp\u003eThe GPS Module is available with cable lengths of 50cm, 1.3m, 2m or 4m, or a roof version with 2m or 4m length cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003eA 37 pin harness comes standard in the kit. Should you need more data, you can add our 22 pin harness as an optional extra.\u003c\/p\u003e\n\u003ch3\u003eTechnical\u003c\/h3\u003e\n\u003cp\u003eDisplay: 6\" TFT Display\u003cbr\u003eResolution: 800 x 480 pixels\u003cbr\u003eContrast: 600:1\u003cbr\u003eBrightness: 700cd\/m2 - 1,100 Lumen\u003cbr\u003eAmbient Light Sensor: Yes\u003cbr\u003eAlarm LEDs: 5 RGB freely configurable\u003cbr\u003eShift Lights: 10 integrated, freely configurable RGB LEDs\u003cbr\u003eCAN Connections: 3\u003cbr\u003eECU Connections: CAN, RS232 or K-Line\u003cbr\u003eECU Compatibility: +1,000 industry-leading ECUs\u003cbr\u003eExpansion CAN Connection: GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam\u003cbr\u003eAnalogue Inputs: 8 fully configurable, max 1,000Hz each\u003cbr\u003eDigital Inputs: 4 speed inputs, lap signal, coil RPM input\u003cbr\u003eDigital Outputs: 2 (1A max each)\u003cbr\u003eSecond CAN: Yes\u003cbr\u003eAccelerometer: Internal 3-axial ± 5G + 3-axial gyroscope+ 3-axis magnetometer\u003cbr\u003eWi-Fi Connection: Yes\u003cbr\u003eInternal Memory: 4GB\u003cbr\u003eBody: Anodised aluminium\u003cbr\u003ePush Buttons: Metallic\u003cbr\u003eConnectors: 2 Motorsport connectors + 1 Binder connector\u003cbr\u003ePower Consumption: 400mA\u003c\/p\u003e\n\u003ch3\u003eSize \u0026amp; Weight\u003c\/h3\u003e\n\u003cp\u003eDimensions: 189.6 x 106.4 x 24.9mm\u003cbr\u003eWeight: 640g\u003c\/p\u003e\n\u003ch3\u003eWaterproof\u003c\/h3\u003e\n\u003cp\u003eIP65\u003c\/p\u003e","brand":"AiM","offers":[{"title":"Default Title","offer_id":53416349630804,"sku":null,"price":3286.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0090\/1503\/3907\/files\/product_mxp_00.webp?v=1768825135","url":"https:\/\/www.ptmotorsportelectrics.com\/en-us\/products\/mxp-1-3-6-tft-car-dash-display-logger","provider":"PT Motorsport Electrics","version":"1.0","type":"link"}