Deatschwerks DW440 Brushless Kit

Petrol horsepower	≈ 1000 HP @ 60 PSI / 4.14 BAR (EFI engines)
E85 horsepower	≈ 750 HP @ 60 PSI / 4.14 BAR (EFI engines)
Flow rate	440 LPH (40 PSI, 13.8v) 620 LPH (40 PSI, 20v)
Safe for ethanol	YES
Fuel pump setup	In-tank fuel pump
Controller unit	C102 Dual speed controller included
Impeller design	Single scroll composite turbine

The DW brings brushless pump technology INTO the fuel tank. With a total height of only 4 inches (102mm), it is the only highflow aftermarket brushless pump that is easily retro-fitted into an OE pump module. Brushless technology reduces friction and heat, increases effeciency, vastly improves pump lifespan in ethanol and methanol fuels, and allows higher voltage inputs for increased flow. The pump support 1000hp on gas and 750hp on e85.

Fits for: Universal
Capacity: 440 liters per hour at 60 PSI with 13,8V, 640 lph at 40 PSI with 20V
Inlet Fitting: 8,5 mm ID, 11,0 mm OD
Outlet Fitting: 3/8" hose clamp
Impeller Design: Single scroll composite turbine
Content: Compact size is optimized for in-tank use
Info: Universal bulkhead harness and fitment kit included
E85 Suitability: Compatible with all fuels including methanol and e100

All DeatschWerks fuel pumps undergo a multi-stage performance test to ensure the highest standards. This process, carried out by trained technicians, gives consumers the assurance that they will not buy any off-the-shelf product.
The performance tests include:

Flow at pressures of 40 psi, 60 psi, 80 psi, 100 psi- Power consumption at each pressure
PRV activation point
Check valve function
Cavitation
Quality control

The DW C101 Brushless Pump Controller is included with the DW440 LPH in-tank fuel pump kits. This controller accepts an 8-22V DC input and creates a digital signal to allow effecient and precise speed and torque control of the DW440 pump. The controller is available in 3 configurations: C102 (dual speed) and C103 (pwm controlled). Optimized for use with the DW440 brushless pump Digital thermal protection.

Optimized for use with the DW440 brushless pump
Variable timing for optimized torque and speed
Designed for compatibility with voltage boosters
Bulkhead wiring kit included for in-module retrofit
Digital thermal protection

Weight: 11.8oz (336g)
External Materials: Anodized T6061
Voltage Input*: 8 Volts min, 22V max (**high load switch/trigger suggested for voltages above 18V)
Max Current: 40 AMP

Universal Walbro in tank Installation Kit

Includes: