MaxxECU MINI Unit Only (with threaded MAP connection, without internal CAN resistor)

MaxxECU

MaxxECU MINI Unit Only (with threaded MAP connection, without internal CAN resistor)

  • Sale
  • €532,00

Advanced entry-level engine control system for up to 4 sequential cylinders. Up to 8 in wasted spark.

Faster and easier tuning with the built-in MAP-sensor up to 3 bar / 43.5 psi of boost. 

Get started faster with the easy-to-use M-Tune PC-software.

( M5 threaded MAP sensor connection without internal CAN termination resistor.)

Features:

    Target engines for MaxxECU MINI

    • All 1-4, 6 and 8 cylinder engines
    • Up to 4 cylinders fully sequentially (using a digital input as HOME)
    • Up to 8 cylinders in wasted spark

    MaxxECU MINI inputs

    • Intake air temperature sensor (IAT)
    • Coolant temperature sensor (CLT)
    • Throttle position sensor (TPS)
    • 1 trigger input (VR/HALL). Automatic trigger level detection
    • 2 digital inputs used for example for speed sensors (Hall) or switches
    • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
    • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost

    MaxxECU MINI outputs

    • 4 injectors outputs. High impedance only
    • 4 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
    • 4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (2A)

    MaxxECU MINI technical

    • CAN bus for expansion modules, OEM vehicle CAN, OBDII
    • USB communication for tuning with MTune
    • 8MB memory for internal logging, up to 1000Hz
    • Supply voltage 8-22V
    • ARM Cortex-M3 120MHz main processor
    • Resolution on ignition: 0.1 degrees
    • Resolution on injectors: 0.001 ms
    • Updates the fuel and ignition calculations 2000 times per second
    • The fastest PC communication on the market
    • 85x120x43mm excluding protruding connectors
    • Weight: 245g (ECU only)
    • Waterproofed aluminium case
    Please note that, due to MaxxECU dealer region restrictions, we can only supply MaxxECU products to customers located in Ireland and Northern Ireland.
      Back to MaxxECU Wire In