Installation is a breeze
Within a few hours your 2JZ is up and running and just waiting to be tuned by the closest tuning mastermind...
Fits most Toyota Supra
Fits 2JZ-GTE, non-VVTi models (MaxxECU also supports the variable valve timing system)
MaxxECU RACE inputs
- Intake air temperature sensor (IAT)
- Coolant temperature sensor (CLT)
- Throttle position sensor (TPS)
- Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
- 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
- 2 extra temperature sensors. Can be used as switches or control of additional functions
- 2 knock sensor inputs
- 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
- 4 extra digital inputs used for example speed sensors (VR / Hall) or switches
- 8 EGT TYPE-K/N inputs (1200C/2200F) in separate harness
MaxxECU RACE outputs
- 8 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
- 8 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
- 9 extra LOW DRIVING outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8,10 (2A), GPO 9 (5A)
- 2 extra +12V DRIVING outputs (GPO 15,16) (2A)
- 4 extra motor outputs (ex E-Throttle). GPO 11-14 (2A)
MaxxECU RACE technical
- CAN bus for expansion modules, OEM vehicle CAN, OBDII
- USB communication for tuning with MTune
- Bluetooth for connecting to mobile devices with MDash
- 8MB memory for internal logging, up to 1000Hz.
- Supply voltage 8-22V
- ARM Cortex-M3 120MHz main processor. Three extra processors to handle the trigger, injectors and knock detection
- Resolution on ignition: 0.1 degrees
- Resolution on injectors: 0.001 ms
- Updates the fuel and ignition calculations 2000 times per second
- The fastest PC communication on the market
- 50Hz sampling rate on all EGT inputs
- Up to 1000Hz sampling rate on analog inputs, see tech docs.
- Weight: 880g
- 155x195x40mm (including mounting points, excluding connector)
Products included
- MaxxECU RACE unit
- MaxxECU Plugin adapter - Toyota Supra MKIV
- Lambda Sensor Bosch wideband lambda LSU 4.2
- MaxxECU Plugin lambda cable (16-pin)
- MaxxECU hose kit (MAP sensor incl nipples)
- MaxxECU USB PC cable 1.5m (STREET/V1/RACE)
- MaxxECU Bluetooth mobile antenna
- MaxxECU sticker
- Connector 6-way socket housing (LSU 4.2 wideband sensor)
- Connector 3-pin housing Superseal
- MaxxECU Quick Guide (English)
Extra Information
⚠️ MaxxECU Dealer Region Restrictions
Please note that, due to MaxxECU dealer region restrictions, we can only supply MaxxECU products to customers located in Ireland and Northern Ireland.
Please note that, due to MaxxECU dealer region restrictions, we can only supply MaxxECU products to customers located in Ireland and Northern Ireland.